The bathroom is essential in our daily life. A clean and well-designed bathroom can be key when selling a home. Use tiles in the bathroom is a practice of most economic, given that these are durable and easy to clean. However, if the tiles are not cleaned for a long period of time, may accumulate mineral deposits and soap plus lime spots on the joints due to the growth of mold. Clean bathroom tiles is a project for which considerable physical effort and several have to contribute cleaners.
Instructions
- Depending on the amount of dirt and rust, starts with just a product of spray cleaning bathrooms and mop kitchen. Moisten the tiles and sprinkle product, going from top to bottom.
- Rub the entire area, paying attention to the surface of the tiles and, for now, not seals. Scrub in a circular motion, exerting enough pressure on the tiles. After describing rubs a straight line from one side to the other on the joints between the tiles. Rinse with warm water.
- If there is still dirt deposits roiling the surface of the tiles, trying to determine whether to water hardness, the iron content of the water or any traces of soap. A high content of iron in the water leaves brown spots. Hard water stains green leaves, while the most of the soaps leaving a white film.
- Start simply by rubbing with white vinegar. You do not dilute missing, but wear gloves. If the tiles clean and shiny finish, you’re done. If not, there are cleaning products designed to remove deposits and iron oxide, which can try. If none of the above work, try a cleaner for the toilet bowl. This kind of product is very caustic and should not leave it on for too long. In addition, it can corrode the metal fittings, so you have to rinse well.
- You need to clean whitewashed boards if soiled. If liming is white, sprinkle some diluted bleach water and leave on for a few minutes before rinsing. Best to clean the lime color is to use a baking soda paste to base (the same used in the kitchen) with circular movements. If all else fails, try a product specifically for cleaning commercial together following the instructions. The key to keeping clean is rubbed well together periodically and let them dry.
Tips and Warnings
- Always wear gloves when using cleaning chemicals.
- If you use aerosol cleaners, use a face mask.